3D printed biomimetic epithelium/stroma bilayer hydrogel implant for corneal regeneration. He Binbin,Wang Jie,Xie Mengtian,Xu Miaoyi,Zhang Yahan,Hao Huijie,Xing Xiaoli,Lu William,Han Quanhong,Liu Wenguang Bioactive materials Corneal regeneration has always been a challenge due to its sophisticated structure and undesirable keratocyte-fibroblast transformation. Herein, we propose 3D printing of a biomimetic epithelium/stroma bilayer implant for corneal regeneration. Gelatin methacrylate (GelMA) and long-chain poly(ethylene glycol) diacrylate (PEGDA) are blended to form a two-component ink, which can be printed to different mechanically robust programmed PEGDA-GelMA objects by Digital Light Processing (DLP) printing technology, due to the toughening effect of crystalline crosslinks from long-chain PEGDA on GelMA hydrogel after photo-initiated copolymerization. The printed PEGDA-GelMA hydrogels support cell adhesion, proliferation, migration, meanwhile demonstrating a high light transmittance, and an appropriate swelling degree, nutrient permeation and degradation rate. A bi-layer dome-shaped corneal scaffold consisting of rabbit corneal epithelial cells (rCECs)-laden epithelia layer and rabbit adipose-derived mesenchymal stem cells (rASCs)-laden orthogonally aligned fibrous stroma layer can be printed out with a high fidelity and robustly surgical handling ability. This bi-layer cells-laden corneal scaffold is applied in a rabbit keratoplasty model. The post-operative outcome reveals efficient sealing of corneal defects, re-epithelialization and stromal regeneration. The concerted effects of microstructure of 3D printed corneal scaffold and precisely located cells in epithelia and stroma layer provide an optimal topographical and biological microenvironment for corneal regeneration. 10.1016/j.bioactmat.2022.01.034

ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects. Biomaterials science Corneal transplantation is the gold standard treatment for corneal-related blindness; however, this strategy faces challenges such as limited donor cornea, graft rejection, suture-related complications, and the need for specialized equipment and advanced surgical skills. Development of tissue adhesives for corneal regeneration is of great clinical value. However, currently available corneal tissue sealants pose challenges, such as lack of safety, biocompatibility, and desired mechanical properties. To meet these requirements simultaneously, a bovine stromal corneal extracellular matrix (dCor) was used to design a bioadhesive photocurable hydrogel based on gelatin methacrylate (GelMA) and polyethylene glycol diacrylate (PEGDA) hydrogels (dCor/Gel-PEG). Integration of dCor into the dual networks of GelMA and PEGDA (Gel-PEG) led to a bioadhesive hydrogel for curing corneal defects, which could be crosslinked by Irgacure 2959 within 5 min ultraviolet irradiation. The viability of corneal stromal stem cells (CSSCs) was improved on the dCor/Gel-PEG hydrogel in comparison to the Gel-PEG hydrogel. The gene expression profile supported the keratocyte differentiation of CSSCs seeded on dCor/Gel-PEG increased KERA and ALDH, with inhibited myofibroblast transdifferentiation decreased α-SMA due to the presence of dCor. Interestingly, the dCor/Gel-PEG hydrogel exhibited favorable mechanical performance in terms of elasticity and bioadherence to the host corneal stroma. and examinations proved the feasibility of this hydrogel for the sutureless reconstruction of deep anterior corneal defects with promising histopathological results. 10.1039/d4bm00129j

Gelatine-based drug-eluting bandage contact lenses: Effect of PEGDA concentration and manufacturing technique. Zidan Ghada,Greene Carol A,Etxabide Alaitz,Rupenthal Ilva D,Seyfoddin Ali International journal of pharmaceutics Drug-eluting bandage contact lenses (BCLs) have been widely studied as an alternative to eye drops due to their ability to increase the drug residence time and bioavailability as well as improve patient compliance. While silicone hydrogel polymers are commonly used in drug-eluting BCLs due to their transparency, mechanical properties and high oxygen permeability, gelatine hydrogels are also clear, flexible and have high oxygen permeability and may therefore be suitable contact lens materials. Moreover, the rheological properties of gelatine hydrogels allow their use as inks in extrusion-based 3D printers, therefore opening the door to a wide range of applications. Drug-loaded gelatine methacryloyl (GelMA) BCLs with different concentrations of poly (ethylene glycol) diacrylate (PEGDA) were prepared using solvent casting and 3D printing. The prepared lenses were characterised for their swelling ratio, in vitro degradation, and drug release properties. The results showed that the incorporation of 10% PEGDA improved the lenses' resistance to handling and protected them during degradation testing, reduced the swelling ratio and prolonged the release of dexamethasone (DEX). Both techniques were deemed suitable to use in the manufacturing of drug-eluting BCLs noting that the optimal formulation may vary according to the preparation technique utilised. 10.1016/j.ijpharm.2021.120452