Molecular interactions of hydrated co-amorphous systems of prilocaine and lidocaine.
International journal of pharmaceutics
It is generally accepted that water as a plasticizer can decrease the glass transition temperatures (Ts) of amorphous drugs and drug excipient systems. However, previous studies suggest that water, as an anti-plasticizer, can increase the Ts of co-amorphous systems of prilocaine (PRL) and lidocaine (LID). In order to investigate the intermolecular interactions between water and co-amorphous PRL-LID systems, Fourier transform infrared spectroscopy (FTIR) and principal component analysis (PCA) were conducted. Water was found to bind with the carbonyl groups of PRL and LID molecularly evenly in the hydrated co-amorphous PRL-LID systems. Quantum chemical simulations visually confirmed the interactions between water and co-amorphous PRL-LID systems. Furthermore, the physical stability of hydrated co-amorphous PRL-LID systems was improved due to the anti-plasticizing effect of water, compared with the anhydrous samples. The preference of water to interact with the carbonyl groups of PRL and LID as binding sites could be associated with the anti-plasticizing effect of water on the co-amorphous PRL-LID systems.
10.1016/j.ijpharm.2024.123807
Development and characterization of co-amorphous griseofulvin/L-leucin by modified solvent processing hot-melt extrusion.
International journal of pharmaceutics
Co-amorphous systems (CAMS) were developed between griseofulvin (GRI) and L-leucine (LEU) at 2:1 wt ratio, by application of a novel solvent assisted hot-melt extrusion (HME) method that involved wet processing/drying of the feeds prior to extrusion. CAMS formation was confirmed by powder crystallography (pXRD) and thermal analysis (DSC). Intermolecular H-bonding between the carbonyl groups of GRI and the hydroxyl and amino groups of LEU were identified by vibrational spectroscopy (ATR-FTIR). The measured glass transition temperatures (Tg) of the extrudates from feeds processed with aqueous acetic acid (AcOH) were markedly lower than that of neat amorphous GRI and values predicted from Gordon-Taylor equation, indicating plasticizing action of AcOH. Drug concentrations during dissolution of CAMS under non-sink conditions (Sink Index 0.0115) were up to x82 higher at plateau compared to crystalline drug solubility. The degree of supersaturation lasted for at least 24 h. Plasticizer (Compritol®/Kolliphor® 75/25) added before extrusion did not impact significantly on CAMS formation but altered the dissolution profile from a spring-and-parachute profile to gradual rise to maximum. These findings reinforce the application of drug/amino acid-based CAMS in formulation, particularly for high-dose drugs, for which polymers are unsuited due to the required large proportions.
10.1016/j.ijpharm.2024.123824
Indomethacin-omeprazole as therapeutic hybrids? Salt and co-amorphous systems enhancing physicochemical and pharmacological properties.
International journal of pharmaceutics
Multidrug therapeutic hybrids constitute a promising proposal to overcome problems associated with traditional formulations containing physical mixtures of drugs, potentially improving pharmacological and pharmaceutical performance. Indomethacin (IND) is a non-selective non-steroidal anti-inflammatory drug (NSAIDs) that acts by inhibiting normal processes of homeostasis, causing a series of side effects, such as gastrointestinal symptoms. Proton pump inhibitors, such as omeprazole (OME), have been used to treat such gastrointestinal tract symptoms. In this work, two new multidrug therapeutic hybrids were prepared (an IND:OME salt and an IND:OME co-amorphous system) by ball mill grinding crystalline IND and OME under different conditions, i.e., liquid assisted grinding (LAG) with ethanol and dry grinding, respectively. The crystalline salt returned to a neutral state co-amorphous system when submitted to ball mill grinding in the absence of solvent (dry grinding), but the reverse process (LAG of the IND:OME co-amorphous system) showed partial decomposition of OME. The IND:OME co-amorphous system showed a higher physical stability than the neat IND and OME amorphous materials (with an amorphous stability longer than 100 days, compared to 4 and 16 h for the neat amorphous drugs, respectively, when stored at dry conditions at room temperature). Furthermore, OME presented a higher chemical stability in solution when dissolved from a salt form than from the pure crystalline form. The dissolution studies showed a dissolution enhancement for IND in both salt (1.8-fold after 8 h of dissolution) and co-amorphous (2.5-fold after 8 h of dissolution) forms. Anti-inflammatory activity using a mice paw oedema model showed an increase of the pharmacological response to IND at a lower dose (∼5mg/kg) for both IND:OME salt (2.8-fold) and IND:OME co-amorphous system (3.2-fold) after 6 h, when compared to the positive control group (IND, administered at 10 mg/kg). Additionally, the anti-inflammatory activity of both salt and co-amorphous form was faster than for the crystalline IND. Finally, an indomethacin-induced gastric ulceration assay in mice resulted in a higher mucosal protection at the same dose (40 mg/kg) for both IND:OME salt and IND:OME co-amorphous system when compared with crystalline OME.
10.1016/j.ijpharm.2024.123857
Unlocking the potential of flavonoid-based co-crystal and co-amorphous systems.
Drug discovery today
Flavonoids are polyphenolic compounds that have multiple benefits in treating various life-threatening diseases. Despite their diverse pharmacological activities, the market potential of flavonoids is hampered due to their poor solubility and low bioavailability after oral administration. The current review highlights the role of co-crystals and co-amorphous systems (CAMs) in enhancing the solubility, permeability, bioavailability, and therapeutic efficacy of flavonoids. It also explains the significance of flavonoid-based co-formers in the formation of co-crystals and CAMs with other APIs to improve their efficacy. Future perspectives, patented formulations, commercial medications (including their phases of clinical trials), and challenges associated with the use of flavonoid-based co-crystals and CAMs are also mentioned in the review.
10.1016/j.drudis.2024.104050
Bosentan monohydrate and sildenafil base as two companions in enabling formulations.
International journal of pharmaceutics
HYPOTHESIS:Sildenafil base and bosentan monohydrate are co-administered in a chronic therapy of pulmonary arterial hypertension (PAH). Both drugs are poorly soluble in water, and their bioavailability is limited to ca. 50 %. Since bosentan is a weak acid, whereas sildenafil is a weak base, we assumed that their co-amorphization could: (i) improve their solubility in the gastrointestinal fluids, (ii) enable to reach supersaturation and (iii) ensure stabilization of supersaturated solutions. If successful, this could accelerate the development of new fixed-dose combination drugs. EXPERIMENTS:The co-amorphous formulations were prepared using high energy ball milling. Their solid state properties were assessed using XRD, DSC, FT-MIR, and dielectric spectroscopy. Particle size distribution and surface wetting were also analyzed. Polarizing optical microscopy and scanning electron microscopy were applied to assess the microstructure of these powders. A new HPLC-DAD method was developed for a simultaneous quantification of both drugs. FINDINGS:It was shown that binary formulations in which bosentan was molecularly dispersed in sildenafil base (Tg = 64-78 °C) could be manufactured in the high energy ball milling process. When the sildenafil load was below 50 wt. %, the formulations showed the greatest thermal stability and formed long-lasting bosentan supersaturation in PBS.
10.1016/j.ijpharm.2024.124312
Study on co-amorphous emerging solubilization behavior after gelation during dissolution: The importance of complexation and anti-crystallization.
International journal of pharmaceutics
Co-amorphous (CM) is a promising technology for enhancing the aqueous solubility of insoluble drugs, but the gelation phenomenon has often occurred during the dissolution process and seriously threatened their solubility/dissolution performance. Therefore, it's quite important to design favorable CM systems to alleviate or even avoid the adverse effects of gelation phenomenon. In this study, CM systems of taxifolin (TAX) and oxymatrine (OMT) (TAX-OMT CMs) were constructed to improve the solubility and dissolution properties of TAX. Interestingly, TAX-OMT CMs gradually aggregated and obviously gelled during dissolution, but the solubility and dissolution of TAX in TAX-OMT CMs were significantly enhanced compared to crystalline TAX. Consequently, the underlying solubilization mechanisms of TAX-OMT CMs after gelation were systematically explored. For one thing, the complexation between the two components in TAX-OMT CMs was verified by phase solubility, fluorescence spectroscopy and isothermal titration calorimetry. For another, the residual solids of TAX-OMT CMs after dissolution evaluation were thoroughly characterized by means of powder X-ray diffraction, fourier transform infrared spectroscopy, scanning electron microscopy, which showed the anti-crystallization property of TAX-OMT CMs. Furthermore, molecular simulation demonstrated the intermolecular interactions of TAX-OMT CMs alone and TAX-OMT complexes in aqueous solution. Finally, pharmacokinetics study in rats suggested that the bioavailability of TAX in TAX-OMT CM (1:2) was approximately 5.5-fold higher than that of crystalline TAX after oral administration. Collectively, this study reveals the importance of complexation and anti-crystallization effects of CM systems on maintaining solubilization behavior after gelation, providing an effective strategy to improve the absorption performance of pharmaceutical CM systems.
10.1016/j.ijpharm.2024.124592
Manifesting the Dasatinib-gallic acid co-amorphous system to augment anticancer potential: Physicochemical characterization, in silico molecular simulation, ex vivo permeability, and in vitro efficacy.
International journal of pharmaceutics
Dasatinib (DAB) has been explored for repurposing in the treatment of breast cancer (BC) due to its known effectiveness in treating leukemia, in addition to its role as a tyrosine kinase inhibitor. Gallic acid (GA) was chosen as a co-former due to its anticancer potential in BC, as demonstrated in several previous studies. DAB is a low-solubility drug, which is a significant hurdle for its oral bioavailability. To address this limitation, a DAB and GA co-amorphous (DAB-GA-CA) system was developed using liquid-assisted grinding and ball mill technology to enhance solubility, bioavailability, and anti-tumor efficacy. Physical characterization investigation revealed that the emergence of the halo diffractogram in PXRD, single glass transition temperature (T) value at 111.7 °C in DSC thermogram, and irregularly shaped blocks with loose, porous surfaces in SEM analysis indicated the formation of the DAB-GA-CA system at 1:1 M ratio. Furthermore, FTIR, Raman spectroscopy, in-silico molecular docking, and molecular dynamic studies confirmed the intermolecular hydrogen connections between DAB and GA. Moreover, the outcomes of the ligands (DAB and GA) and receptors (BCL-2, mTOR, estrogen receptor, and HER-2) docking studies demonstrated that both DAB and GA could interact with those receptors, leading to preventive action on BC cells. Additionally, the solubility and dissolution rate significantly improved at pH 6.8, and the permeability study indicated that DAB-GA-CA showed 1.9 times higher apparent permeability compared to crystalline DAB. Furthermore, in vitro cytotoxicity assessments of the DAB-GA-CA system revealed 3.42 times lower IC than free DAB. The mitochondrial membrane depolarization, apoptotic index, and reactive oxygen species formation in MCF-7 cells were also notably higher in the DAB-GA-CA system than in free DAB. Hence, this research suggests that the DAB-GA-CA system could substantially enhance oral delivery, solubility, and therapeutic efficacy.
10.1016/j.ijpharm.2024.124672
Amphiphilic disodium glycyrrhizin as a co-former for ketoconazole co-amorphous systems: Biopharmaceutical properties and underlying molecular mechanisms.
International journal of pharmaceutics
Co-amorphous systems (CAMs) have been extensively investigated to improve the dissolution of hydrophobic drugs. However, drug precipitation during the storage or dissolution of CAMs has still been a major challenge. Here, disodium glycyrrhizin (NaGA) was first used as a co-former in CAMs based on its multiple hydroxyl groups and amphiphilic structure. Ketoconazole (KTZ), a BCS class II drug, was selected as a model drug. KTZ-NaGA CAMs at mass ratios of 1:1, 1:2.5, 1:5 and 1:10 were prepared by the spray drying method and further characterised by PXRD and DSC. The 1:2.5, 1:5 and 1:10 groups exhibited significantly enhanced C (all approximately 26.67-fold) and stable maintenance of supersaturation compared to the crystalline KTZ and the corresponding physical mixtures in non-sink dissolution tests, while the 1:1 group exhibited an unstable medium C (all approximately 14.67-fold). The permeability tests revealed that the permeation rate of KTZ in KTZ-NaGA CAMs under the concentration of NaGA in solution above the critical micelle concentration (CMC) showed a significant downwards trend compared to that below CMC. The underlying molecular mechanisms were involved in molecular miscibility, hydrogen bond interactions, solubilisation and crystallisation inhibition by NaGA. Pharmacokinetic studies demonstrated that the AUC of KTZ in 1:1, 1:2.5, 1:5 and 1:10 groups were significantly higher than those of the crystalline KTZ group with 2.13-, 2.30-, 2.16- and 1.86-fold, respectively (p < 0.01). In conclusion, NaGA has proven to be a promising co-former in CAMs to enhance hydrophobic drug dissolution and bioavailability. Its effect on intestinal permeation rate of drugs also deserves attention.
10.1016/j.ijpharm.2024.124673
Investigation of the dissolution rate and oral bioavailability of atenolol-irbesartan co-amorphous systems.
International journal of pharmaceutics
Irbesartan (IBS), a common drug to treat hypertension, has poor oral bioavailability because of its limited aqueous solubility. Recently, co-amorphous systems (CAMs) have demonstrated the ability to improve the solubility of poorly water-soluble drugs. In this study, IBS was co-amorphized with a pharmacologically relevant drug atenolol (ATL) by melt-quenching. The structures of the resulting ATL-IBS CAMs, which were formulated in molar ratios of 2:1, 1:1, 1:2 and 1:4, were characterized by the polarizing microscopy, powder X-ray diffraction, differential scanning calorimetry, and Fourier-infrared transform spectroscopy. ATL-IBS CAM showed higher IBS dissolution than crystalline IBS, amorphous IBS (IBS AM) and the other CAMs. The results of the supersaturated solution stability showed that ATL enhanced the supersaturation maintenance of IBS by extensive interactions. The CAMs exhibited excellent physical stability at 25°C/60% RH. The pharmacokinetics experiments showed that the relative oral bioavailability of IBS was 2.78-fold higher than bulk IBS (p < 0.001) after oral administration of ATL-IBS CAM to rats. The results of this study demonstrate that CAMs provide an alternative option for the development of fixed dose combination of ATL and IBS.
10.1016/j.ijpharm.2024.124704
Exploring the preparation of griseofulvin CAMS with amino acids of different hydrophobicity as co-formers using a modified hot-melt extrusion process.
International journal of pharmaceutics
Co-amorphous systems (CAMS) of griseofulvin (GRI) with the amino acids (AA): L-lysine (LYS), L-valine (VAL) and L-methionine (MET) of increasing hydrophobicity were prepared using a solvent assisted hot-melt extrusion (HME). Co-formability was evaluated by thermodynamic miscibility prediction, thermal analysis (DSC), powder crystallography (pXRD) and vibrational spectroscopy (ATR-FTIR). Decomposition temperature range was defined by thermogravimetry (TGA) and DSC. Solubilities of crystalline and amorphous drug were determined by the UV-extinction method. The physical stability of GRI/AA CAMS was evaluated by accelerated tests and for ratios 1:1 and 1:2 was excellent. Non-sink dissolution tests of equimolar CAMS of the more hydrophobic MET and VAL revealed long lasting supersaturation, above the solubility of amorphous drug, whereas ratios 2:1 and 1:2 gave lower supersaturation due to partial recrystallization during dissolution, despite the good physical stability. CAMS of the hydrophilic LYS were physically stable but showed poor dissolution, possibly due to self-association of LYS in water. Addition of wetting agent in the dissolution medium improved dissolution without altering the profile. Since previous attempts to formulate GRI/AA CAMS with purely mechanical methods found only moderate success, the feed pretreatment HME method employed in this work makes an excellent alternative for drug/AA CAMS where mechanical or solvent evaporation methods fail.
10.1016/j.ijpharm.2024.124818
Evaluation of aspartame as a co-former in the preparation of co-amorphous formulations of dipyridamole using spray drying.
International journal of pharmaceutics
Co-amorphous systems (CAMs) have shown promise in addressing the challenges associated with poorly water-soluble drugs. However, the limited selection of co-formers and the use of lab-scale techniques for their preparation present challenges in fully utilizing the advantages of CAMs. In this study, we used aspartame (a methyl ester of the aspartic acid/phenylalanine) as a model dipeptide with the BCS class II drug dipyridamole, to prepare co-amorphous systems using spray drying. The feed solutions were prepared by dissolving the drug and co-former into methanol-water mixtures. The spray drying process was evaluated and solid-state properties were compared with those of the individual amino acids, amino acid mixtures and aspartame as co-formers. Co-amorphous systems prepared with aspartame (AspPhe) exhibited better solid-state properties, including a higher glass transition temperature (T), compared to the individual amino acids and the mixture of amino acids. Additionally, this formulation showed improved physical stability when stored at 25 °C/60 % RH conditions. Hirshfeld Surface (HS) analysis was employed to visualize and analyse the molecular interaction sites within the crystal structures of dipyridamole and aspartame. The observed interactions were then correlated with the molecular interactions identified through FT-IR spectroscopic analysis within the CAMs. The spectroscopic analysis revealed molecular interactions between the sites found at the shortest distances in the HS analysis. The dominant hydrogen bond interactions identified in the co-amorphous DPM-AspPhe system was found to contribute significantly to its improve stability. X-ray powder diffraction in non-ambient mode reveals that both temperature and humidity play a role in the crystallization of the co-amorphous DPM-AspPhe. Crystallization rates increased notably at high temperature and humidity. To predict stability under accelerated conditions, the crystallization rates from DPM-AspPhe were fitted to a modified Arrhenius equation. However, the predictive accuracy of the resulting model was limited to a specific range of conditions.
10.1016/j.ijpharm.2024.124913
"Aging" in co-amorphous systems: Dissolution decrease and non-negligible dissolution increase during storage without recrystallization.
International journal of pharmaceutics
Developing co-amorphous systems is a promising strategy to improve the water solubility of poorly water-soluble drugs. Most of the studies focused on the initial dissolution rate of the fresh co-amorphous systems, and only physical stability was investigated after storage. However, the maintenance of the enhanced dissolution rate of co-amorphous systems after storage is necessary for further product development. The maintenance of amorphous forms after storage does not always mean the maintenance of the dissolution rate. In this study, indomethacin, arginine, tryptophan, and phenylalanine were used as the model drug and the co-formers to prepare co-amorphous systems and then stored under dry condition and RH 60 ± 5 % condition. No recrystallization was observed after the storage for 40 d and 80 d. Interestingly, both intrinsic dissolution rate (IDR) decrease and unexpected increase after storage were confirmed. The further mixing of IND and the co-former at a molecular level and the moisture changes of the co-amorphous systems during storage were supposed to play important roles in the aging. This study reminds us that the possible dissolution changes (both dissolution decrease and increase) of co-amorphous systems during storage should be carefully considered, though these samples maintained amorphous forms.
10.1016/j.ijpharm.2024.124943